Rocksmith's range of GX Hammers don't not need a foot valve for the bit. This eliminates operation problems associated with the foot valve.
The GX hammers perform well with higher piston frequency for softer formation.
We also offer a full range of spare parts, ensuring fast and reliable supply.
Model No. RSH-GX5
| Total Weight |
Outside Diameter |
Overall Length |
Air Consumption (CFM) |
Air Consumption (M3 / hr) |
||||
|---|---|---|---|---|---|---|---|---|
| 61 kg 134.6 lbs |
118 mm 4.6" |
1031 mm 40.06" |
150 PSI 290 |
250 PSI 490 |
350 PSI 720 |
10.5 BAR 8.2 |
17.6 BAR 13.9 |
24.1 BAR 20.4 |
| General Specifications | ||
|---|---|---|
| Connection | API 3-1/2" Reg. Pin | |
| Bit Shank | M50 | |
| Reversible casing | NO | |
| Recommended bit diameter | metric 130 - 152mm |
imperial 5-1/8 - 6" |
| Backhead across flats (mm) | 40 X 100 AF | |
| Optional Bit Shank | QL50 | |
| No. | Part No. | Part Name | Qty |
|---|---|---|---|
| 1 | RSH-GX5-1-T | Top Sub (API 3-1/2") |
1 |
| 2 | RSH-GX5-1-TO | Top Sub O-Ring | 1 |
| 3 | RSH-GX5-1-V | Check Valve | 1 |
| 4 | RSH-GX5-1-VS | Check Valve Spring | 1 |
| 6 | RSH-GX5-1-HSM | Spacer Ring | 1 |
| 5 | RSH-GX5-1-HM | Make Up Ring | 1 |
| 6 | RSH-GX5-1-D | Air Distributor | 1 |
| 7 | RSH-GX5-1-DO | Air Distributor O-Ring | 1 |
| 8 | RSH-GX5-1-L | Cylinder | 1 |
| 9 | RSH-GX5-M-P | Piston | 1 |
| 10 | RSH-GX5-M-C | Case | 1 |
| 11 | RSH-GX5-M-B | Bearing | 1 |
| 13 | RSH-GX5-1-S | Stop Ring | 1 |
| 14 | RSH-GX5-M-R | Bit Retainer Ring | 1 |
| 15 | RSH-GX5-M-RO | Bit Retainer Ring O-Ring | 1 |
| 16 | RSH-GX5-M-K | Driver Chuck | 1 |
For 18" to 57" holes
For 10" to 22" holes
For 3.5" to 11" holes
Rocksmith's range of GX Hammers don't not need a foot valve for the bit. This eliminates operation problems associated with the foot valve.
For 5" to 8" holes
It’s a new version of Reverse Circulation Hammer. The cuttings are evacuated to the ground through the inner tube of RC hammer.
RockSmith RC Hammers lead to productivity growth and cost savings.
| model | RSH-RC5 | RSH-RC8 | RSH-RC12 | |||
|---|---|---|---|---|---|---|
| Connection | 4" / 4.5" Metzke, 4.5" Remet | Hex Joint | Hex Joint | |||
| Bit Shank | RC50 | RC80 | RC120 | |||
| General Specifications | Metric | Imperial | Metric | Imperial | Metric | Imperial |
| Recommended bit diameter | 133 - 146 | 5-1/4 - 5-3/4 | 204 - 260 | 8-1/5 - 10-5/8 | 300 - 426 | 11-4/5 - 16-7/9 |
| Outside Diameter | 121 | 4.76 | 194 | 7.64 | 286 | 11.26 |
| Length w/o connection & bit | 1078.5 | 42.46 | 1182.0 | 46.5 | 1625.0 | 64.0 |
| Weight w/o bit | 62.0 | 136.7 | 203.0 | 447.6 | 523.6 | 1154.5 |
| Backhead across flats (mm) | 30 X 116 AF | 50 X 160 AF | 40 X 260 AF | |||
| Air Consumption | ||||||
| 6.9 BAR / 100 PSI (m³/min & cfm) | ||||||
| 10.3 BAR / 150 PSI (m³/min & cfm) | 7.9 | 280 | 13.0 | 460 | 20.4 | 720 |
| 13.8 BAR / 200 PSI (m³/min & cfm) | 11.3 | 400 | 18.1 | 640 | 28.3 | 1000 |
| 17.2 BAR / 250 PSI (m³/min & cfm) | 15.3 | 540 | 23.8 | 840 | 39.6 | 1400 |
| 24.1 BAR / 350 PSI (m³/min & cfm) | 22.6 | 800 | 34.0 | 1200 | ||
* Other size of TRC Hammer is available upon customer’s request.
Phone 1800 999 893
Offices in Melbourne & Perth
1800 999 893
